|
 |
|
| Design and choice of material to ensure your peace of mind. |
|
| Dolphin SM battery chargers are established as leaders in their field. In the last 7 years, more than 40,000 units have been sold the world over. |
|
| Boat builders and boat owners worldwide choose Dolphin battery chargers for their reliability and excellent cost/performance ratio. |
|
| The features of the new Dolphin SM 12V 10, 15 & 20 and 24V 10A Amp battery charges guarantee reliability, high efficiency and come with a 2 year world-wide warranty. |
|
 |
Fully automatic four-stage battery charger. |
|
Can charge up to three battery banks simultaneously (12V10A : 2 banks) |
|
Charge setting for wet and calcium batteries |
|
Universal input voltage 115/230 Vac (automatic for the 12V20A & 24V10A, manual for 12V10A and 12V15A) |
|
Protection features |
|
|
Short-circuit protection |
|
Over temperature shutdown (Except 12V10A) |
|
Overload |
|
Input protection (fuses) |
|
|
Insensitive to input frequency 50/60 Hz |
|
Tolerant to high input voltage variations |
|
Batteries and mains supply 1.5 m length cables included (12V10A & 12V15A only) |
|
Advanced power switching technology |
|
Clean EMI/RFI output - no interference with other onboard electronics |
|
Built to ABYC and UL standards |
|
CE marked |
|
Marine-grade construction with conform tropicalized circuit boards. |
|
Advanced engineering and modern design |
|
Up to date SMD technology |
|
Aluminium casing with powder-coated treatment for better corrosion resistance |
|
|
MODEL |
12V10A |
12V15A |
12V20A |
24V10A |
AC input voltage range
AC input frequency |
115V or 230V (± 15%)
50/60 Hz (± 10%) |
115V/230V adjustment |
Manual |
Manual |
Automatic |
Automatic |
AC consumption full load |
230VA |
370VA |
350VA |
350VA |
Cos phi |
0.7 |
0.7 |
1.0 |
1.0 |
Nominal battery charge |
12 VDC |
12 VDC |
12 VDC |
24
VDC |
Charge Current ± 5% |
10
Amps |
15 Amps |
20 Amps |
10 Amps |
Battery
Capacity |
100/150ah |
150/250ah |
250/400ah |
100/150ah |
Battery type setting |
Wet/Calcium |
DC Outputs |
2 |
3 |
3 |
3 |
Output voltage (boost/float): |
Wet |
14.4/13.8v |
14.4/13.8v |
14.4/13.8v |
28.8/27.2v |
Calcium |
|
15.0/13.8v |
15.0/13.8v |
30.0/27.2v |
Protection: |
Short Circuit |
Yes |
Yes |
Yes |
Yes |
Overload |
Yes |
Yes |
Yes |
Yes |
Reverse polarity |
Yes |
Yes |
Yes |
Yes |
Over temperature |
Yes |
Yes |
Yes |
Yes |
Display |
On/Off LED |
Operating Temperature |
0°C-50°C (32°F-122°F) |
Storage Temperature |
-20°C-70°C (-4°F-158°F) |
Humidity |
10%-90% |
Cooling |
Natural cooling |
Speed controlled fan cooling |
Speed controlled fan cooling |
Speed controlled fan cooling |
EMC Standard |
EN 50081-1 & EN50082-1 |
Safety Standard |
EN 60335-1 |
Enclosure |
Powder coated aluminium |
|
|
 |
|
|
Bulk Stage: A high current is sent to the battery until it reaches approx 80% of full charge |
|
Absorption Stage: Voltage level is maintained & the current reduced until battery is 100% charged |
|
Float Stage: Voltage & current ruduced to maintain battery. Float gives what the battey requires |
|
Power Supply: Charger “keeps up” with loads applied to the battery while it’s attached to AC power. |
|
|
Model |
Part Number |
Charge rate |
Dimensions mm
(H x W x D) |
Weight
(Kg) |
12V10A |
299700 |
10 Amps |
180 x 170 x 100 |
1.5 |
12V15A |
299702 |
15 Amps |
180 x 170 x 100 |
1.5 |
12V20A |
299715 |
20 Amps |
200 x
180 x 100 |
1.5 |
24V10A |
299772 |
10 Amps |
200 x 180 x 100 |
1.5 |
|
|
| The Dolphin range of Battery Chargers has always been recognised for its outstanding quality, one that we are proud to support with a 3 year warranty. Due to production on a wide scale, REYA is able to offer high quality, truly international battery chargers, at a reasonable price. Smart, indeed! |
|
| In addition, Dolphin Smart Battery Chargers are insensitive to international differences in input voltage and frequency. They automatically sense input power (90-264 VAC / 50-60 Hz), meaning that boatbuilders and boat owners worldwide no longer need worry about the compatibility of their batteries and chargers. |
|
| The features of the new Dolphin SM battery chargers are synonymous with reliability and high efficiency and have a 3-year worldwide supported warranty. This new generation of microprocessor controlled chargers represents a radical technological advance. |
|
| In recognition of the perfect combination of aesthetic design and functionality, Dolphin Battery Chargers were nominated for and received a Special Mention in the DAME Awards at METS 2003. |
|
| In accordance with European Law, Dolphin Smart Battery Chargers have power factor correctors, so the charging process is quicker and more efficient. Not only is this one smart battery charger suitable for all types of batteries from 'AC Delco' to 'Wet', with a flick of a switch, it will keep your battery charged throughout periods of inactivity (like the winter) AND will restore flat batteries to life with its sulphation recovery programme. Smart indeed! |
|
|
6 charging programmes |
|
Fully automatic multi stage battery charger |
|
Can charge up to three battery banks simultaneously |
|
Special sulphation recovery programme. |
|
2 winterizing programmes |
|
Power supply position |
|
Automatic universal input voltage 115/230 Vac |
|
Insensitive to input frequency 50/60 Hz |
|
Protection features |
|
|
Short-circuit protection |
|
Over temperature shutdown |
|
Overload |
|
Input protection (fuses) |
|
|
Tolerant to high input voltage variations |
|
Advanced power switching technology |
|
Clean EMI/RFI output - no interference with other onboard electronics |
|
Built to ABYC and UL standards |
|
CE marked |
|
Marine-grade construction with conform tropicalized circuit boards. |
|
Advanced engineering and modern design |
|
Up to date SMD technology |
|
Aluminium casing with powder-coated treatment for a better corrosion resistance |
|
ISO 9002 assembling subcontractor |
|
3 year warranty |
|
|
Charging Programmes
(by internal switch) |
Switch position: 00
Wet or flooded electrolyte batteries. |
Switch position: 01
Sealed lead batteries |
Switch position: 02
Calcium-lead batteries |
Switch position: 03
“AC DELCO” batteries |
Switch position: 04
“Yellow Top” batteries |
Switch position: 05
Free lead batteries winterizing |
Switch position: 06
Sealed lead batteries winterizing |
Switch position: 07
Gel batteries |
Switch position: 08
Power supply |
Switch position: 09
Sulphation recovery program |
|
|
 |
|
|
Switch mode |
|
Wide input voltage prevents current fluctuation problems. |
|
Suitable for either wet or gel batteries by means of an internal switch. Will charge up to 3 batteries simultaneously. |
|
Automatic control, optimum utilisation of the supply current. |
|
Functions from -10°C to +55°C. |
|
Easy to install. |
|
Corrosion resistant, powder coated aluminium casing. |
|
Suitable for continuous use. Can be used in parallel with other chargers or alternators. |
|
Nominal output. In the event of battery failure can be used as power supply. |
|
LED status indicators. |
|
Remote control panel option. |
|
Battery temperature sensor (optional) |
|
Power First dual voltage battery chargers can be used all over the world for marine applications. With a simple flick of an internal switch, the 230V/50Hz battery charger suitable for use in Europe is converted to 110V/60Hz suitable for use in the U.S.A. or Japan and vice versa. |
|
Through use of superior surface mount technology and non-corrosive materials, the PowerFirst range is very light and compact. |
|
|
Model |
1204 |
1280 to 12120 |
2460 to 24160 |
Mains voltage supply |
230 Vac |
230 Vac (or 115/230 Vac) |
Mains supply range |
180 - 265 Vac / 90 - 140 Vac |
Input frequency |
50 - 60 Hz |
Outputs |
1 |
3 |
3 |
Float voltage : |
Wet battery |
13,6 V |
13,3 V 26,6 V |
13,6 V 27,2 V |
Gel battery |
230 Vac (or 115/230 Vac) |
230 Vac (or 115/230 Vac) |
Temperature compensation |
No |
Optional |
Charging characteristics |
IU |
IUoU (except 24120 & 24160) |
Reverse polarity protection |
Yes |
Yes |
Yes |
Short circuit output protection |
Yes |
Yes |
Yes |
Over temperature protection |
No |
Yes |
Yes |
Fuses input/output |
Yes |
Yes |
Yes |
Operating temperature |
-10 to +55°C |
Fan |
No |
Yes |
Yes |
Use in parallel |
|
Yes |
Yes |
Housing |
Aluminium - White paint epoxy |
Protection |
IP22 |
Safety Class |
EN 60950 |
EMI Norm |
EN 55011 |
Warranty |
1 year |
3 years |
3 years |
|
|
Model |
Input |
Charge |
Battery Capacity |
Weight |
Box |
Code |
12 Volts - 3 outputs : |
12V 04A |
S |
4 Amps |
50Ah |
0.5 kg |
4 |
299001 |
12V 80A |
D |
80 Amps |
600/1000 Ah |
3.8 kg |
2 |
299008 |
12V 100A |
S |
100 Amps |
800/1200 Ah |
5.9 kg |
1 |
299007 |
12V
100A |
D |
100 Amps |
800/1200 Ah |
5.9 kg |
1 |
299510 |
12V
120A |
S |
120 Amps |
1000/1500 Ah |
5.9 kg |
1 |
299009 |
12V
120A |
D |
120 Amps |
1000/1500 Ah |
5.9 kg |
1 |
299522 |
24 Volts - 3 outputs : |
12V 60A |
D |
60 Amps |
600/1000 Ah |
5.9 kg |
1 |
299515 |
12V 80A |
S |
80 Amps |
600/1000 Ah |
5.9 kg |
1 |
299016 |
12V 80A |
D |
80 Amps |
600/1000 Ah |
5.9 kg |
1 |
299516 |
12V 100A |
S |
100 Amps |
800/1400 Ah |
7 kg |
1 |
299017 |
12V 120A |
S |
120 Amps |
1200/1600 Ah |
11 kg |
3 |
299018 |
12V 120A |
T |
120 Amps |
1200/1600 Ah |
11 kg |
3 |
299243 |
12V 154A |
T |
150 Amps |
1600/2000 Ah |
13 kg |
3 |
299046 |
12V 160A |
S |
160 Amps |
1600/2000 Ah |
13 kg |
3 |
299019 |
|
|
Input ref |
S |
230 Vac supply
(180 - 265 Vca - 50/60 Hz) |
D |
115/230 Vca (dual voltage)
(180 - 265 Vca / 90 - 230 Vca - 50/60 Hz) |
T |
380 Vac supply
(3P+N+T - 50/60 Hz) |
|
|
Box
size: H x W x D |
Box 1 : |
275 x 345 x 170 |
Box 2 : |
275 x 340 x 85 |
Box 3 : |
630 x 340 x 170 |
Box 4 : |
160 x 90 x 82 |
|
|
 |
|
Know more about |
Dolphin Switch mode battery chargers
|
Visit : www.reya.com |
|
|
 |
|
|
 |
|
